Polishing foam or body varnish (blower wax can also be used).
A soft, clean microfiber cloth.
Hot water and neutral soap for pre-cleaning.
Another dry microfiber cloth for the final finish.
Optional demineralized water for rinsing.
Step by step to remove scratches
1. Clean the affected area
Before applying a product, it is essential that the surface is completely free of dust, dirt or dirt. Any particles left on the paint during polishing can generate additional micro-rays. Wash the area with lukewarm water and neutral soap, rinse well and dry with a clean microfiber cloth.
2. Apply polishing foam
Place a small amount of polishing foam on the microfiber fabric, not directly on the body. With this it reaches to work an area of the approximate size of an A4 sheet. It’s best to apply little product and add if necessary, instead of overdoing it from the start.
3. Rub in circular motions
Start polishing the scratched area with smooth, steady circular motions, applying moderate pressure. There is no need for excessive force: the work is carried out by the soft abrasive components of the foam, which unevenly lower the varnish layer until the rayon is paired. Continue the movement for one or two minutes per section.
4. Remove the excess
Once the area is worked, take the second microfiber cloth, clean and dry, and remove the residue from the varnish with gentle movements. At this time, you will be able to observe how the rayon has significantly graduated or completely disappeared, depending on its depth.
5. Review and repeat if necessary
If the rayon is still noticeable, you can repeat the process one or two more times. In slightly more pronounced stripes, it usually takes two or three passes to achieve optimal results. The important thing is not to overuse polishing in the same area, as excess can wear out the varnish too much.
